Specification Sheet

J-2550, 20" FLOOR MODEL

DRILL PRESS 115V 1PH

354402

Accuracy, stability and versatility are the benchmark features of the JET 15"

and 20" Drill Presses. This high quality line of JET Drill Presses offer a greater

range in spindle speeds than other machines of this class. JET backs their

machines with the industry-leading Two Year Warranty.

Constructed to provide a solid base for drilling

The enclosed spidle assembly is supported by four permanently lubricated

ball bearings for greater precision and accuracy

Head casting features a permanently lubricated ball bearing spindle

assembly, using four heavy duty ball bearings in an encloseCast Iron head d

quill for longer life.

Large quill allows greater accuracy

Large ground steel column for maximum head and table support

Largeproductiontabletilts45°

4-3/4" stroke for deep hole applications

Accurate depth stop for precice hole depths

5/8" drill chuck and arbor

Telescoping safety spindle guard

FEATURES

JET RED ASSURANCE 2-YEAR WARRANTY

JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the

United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair,

assist you in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center

in your area call 1-800-274-6848.

PAGE 1
J-2550, 20" FLOOR MODEL DRILL PRESS 115V 1PH 354402 Accuracy, stability and versatility are the benchmark features of the JET 15" and 20" Drill Presses. This high quality line of JET Drill Presses offer a greater range in spindle speeds than other machines of this class. JET backs their machines with the industry-leading Two Year Warranty.
PAGE 2
J-2550, 20" FLOOR MODEL DRILL PRESS 115V 1PH 354402 SPECIFICATIONS Style (Type) Belt Drive Drills to Center of Circle (in) 20 Drilling Capacity Cast Iron (In.) 3/4 Drilling Capacity Mild Steel (In.) 5/8 Distance Column to Spindle (In.) 10 Number of Spindle Speeds 12 Range of Spindle Speeds (RPM) 150, 260, 300, 440, 490, 540, 1,150, 1,550, 1,840, 2,220, 2,950, 4,200 Column Diameter (In.) 3-5/8 Spindle Taper (In. x TPI) MT-3 Spindle Travel (In.) 4-3/4 Spindle Distance to Base (In.