Product Manual

6 JAT-103 Impact Wrench

Tool specifications
Model number JAT-103
Stock number 505103
Square drive 1/2 in.
Bolt capacity 9/16 in.
Anvil retainer type Hog ring
Impact mechanism Twin hammer
Maximum torque 680 lbf•ft (921.96 N•m)
Working torque 25-400 lbf•ft (33.9-542.3 N•m)
Free speed 8,000 RPM
Blows per minute 1200
Average air consumption 4.2 CFM
Air inlet 1/4 in. NPT
Air hose inside diameter 3/8 in.
Required air pressure 90 psi (621 kPa)
Vibration value 2.8 m/s
2
Noise level
1
100 dB(A)
Power setting 5 air regulator settings, forward and reverse
Grip Pistol style
Overall Length 7-1/4 in. (184.15 mm)
Housing material Aluminum
Net weight 5.91 lb. (2.68 kg)
Shipping weight 6.39 lb. (2.90 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.