Product Manual

JET 5

Tool specifications
Model
JAT-128 Impact Wrench
Stock number 505128
Square drive 1 in.
Anvil retainer type Ring
Impact mechanism Twin hammer
Maximum torque 1,400 lbf•ft (1898 N•m)
Working torque 240~1100 lbf•ft (325.4~1491.4 N•m)
Free speed 5300 RPM
Blows per minute 936
Average air consumption 56.24 SCFM; 7.9 CFM at 90psi
Actual (under load) air consumption 37.91 SCFM; 5.32 CFM at 90psi
Air inlet 3/8 in. NPT
Air hose inside diameter 1/2 in.
Required air pressure 90 psi (621 kPa)
Vibration value 8.81 m/s
2
Sound power
1
114.4 dB(A)
Sound pressure
1
103.4 dB(A)
Grip Pistol style
Overall Length 9.7 in. (246.38 mm)
Housing material Composite
Net weight 7.45 lbs. (3.38 kg)
Shipping weight 8.1 lbs. (3.7 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.