Product Manual

JET 5

Tool specifications
Model JAT-434, Angle Grinder
Stock number 505434
Wheel size (Dia x Bore x Thk)
4 x 5/8 x 1/4 in.
(101.6 x 15.88 x 6.35mm)
Wheel type Type 27
Spindle thread 3/8in.–24UNF
Horsepower 0.9
Free speed 12,000 RPM
Air consumption – free speed 17.6 SCFM / 2.5CFM at 90psi
Air consumption – under load 20 SCFM / 2.8CFM at 90psi
Air Inlet 1/4 in. NPT
Air Hose inside diameter 3/8 in.
Required air pressure 90 psi (6.2 bar)
Vibration value 6.0 m/s
2
Sound power
1
93 dB(A)
Sound pressure
1
82 dB(A)
Speed settings Variable throttle lever
Overall length 8.8 in. (223.5mm)
Housing material Aluminum
Net weight 4 lb. (1.81 kg)
Shipping weight 4.96 lb. (2.25 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.