Product Manual

6
Specifications
Stock Number .......................................................................................................................... 708580
Model Number ............................................................................................................................ JBM-5
Motor ................................................................................................... TEFC, 1/2HP, 1PH, 115V, 60Hz
RPM ............................................................................................................................................ 1725
Chuck Capacity .............................................................................................................................. 3/8”
Chisel Capacity .....................................................................................................................1/2” x 1/2”
Chisel Shank Capacity ............................................................................................................ 5/8”, 3/4”
Head Stroke ................................................................................................................................ 4-3/4”
Chisel Center to Fence ................................................................................................................ 3-1/2”
Under Hold-Down ..............................................................................................................................4”
Fence Size .................................................................................................................. 1-9/16” x 13-3/4”
Base Size.................................................................................................................... 7-5/8” x 12-3/16”
Bushing Size ..................................................................................................................... 5/8” and 3/4”
Weight ....................................................................................................................................... 44 lbs.
The above specifications were current at the time this manual was published, but because of our policy of continuous
improvement, Walter Meier reserves the right to change specifications at any time and without prior notice, without
incurring obligations.
Unpacking
Open shipping container and check for
shipping damage. Report any damage
immediately to your distributor and
shipping agent. Do not discard any
shipping material until the Mortiser is
assembled and running properly.
Compare the contents of your container
with the following parts list to make sure
all parts are intact. Missing parts, if any,
should be reported to your distributor.
Read the instruction manual thoroughly
for assembly, maintenance and safety
instructions.
Contents
A. Mortising Machine
B. Hydraulic Cylinder
C. Handle
D. 3/4” Chisel Bushing
E. 5/8” Chisel Bushing
F. Spindle Extension
G. Chuck Key
H. Table
I. Hold Down
J. Fence Assembly
K. Screws (2)
L. Owner’s Manual (not shown)
M. Warranty Card (not shown)