Product Manual

JET 5

Tool specifications
Model number JCT-3620 JCT-3621 JCT-3622 JCT-3623
Stock number 550620 550621 550622 550623
Shank bushing style Round Hex Round Hex
Shank bushing size 0.680 in. 0.580 in. 0.680 in. 0.580 in.
Stroke length 3-1/32 in. 3-1/32 in. 4-1/64 in. 4-1/64 in.
Bore size 1-1/8 in. 1-1/8 in. 1-1/8 in. 1-1/8 in.
Impact rate (blows per
minute)
2,200 2,200 1,500 1,500
Average air consumption 34 CFM 34 CFM 34 CFM 34 CFM
Air Inlet 3/8 in. NPT 3/8 in. NPT 3/8 in. NPT 3/8 in. NPT
Air hose minimum inside
diameter
1/2 in. 1/2 in. 1/2 in. 1/2 in.
Required air pressure 90 psi (6.2 bar) 90 psi (6.2 bar) 90 psi (6.2 bar) 90 psi (6.2 bar)
Energy per blow @90psi 22.9 Joule 22.9 Joule 30.46 Joule 30.46 Joule
Vibration value 15 m/s
2
15 m/s
2
26 m/s
2
26 m/s
2
Noise level
1
95 dB(A) 95 dB(A) 98 dB(A) 98 dB(A)
Speed settings Variable throttle Variable throttle Variable throttle Variable throttle
Overall length 14 in. (356 mm) 14 in. (356 mm)
16-1/2 in. (419mm) 16-1/2 in. (419mm)
Housing material steel steel steel steel
Net weight 18 lb. (8.2 kg) 18 lb. (8.2 kg) 20 lb. (9 kg) 20 lb. (9 kg)
Shipping weight 21 lb. (9.5 kg) 21 lb. (9.5 kg) 23 lb. (10.4 kg) 23 lb. (10.4 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.