This .pdf document is bookmarked Operating Instructions and Parts Manual Metal Dust Collector Model JDC-501 JET 427 New Sanford Road LaVergne, Tennessee 37086 Ph.: 800-274-6848 www.jettools.com Part No.
1.0 Warranty and Service JET warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official JET branded website. • JET products carry a limited warranty which varies in duration based upon the product.
2.0 Table of contents Section Page 1.0 Warranty and Service ..................................................................................................................................... 2 2.0 Table of contents............................................................................................................................................ 3 3.0 Safety warnings.....................................................................................................................................
12. Keep safety guards in place at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately after completion of maintenance. 3.0 Safety warnings 1. Read and understand the entire owner's manual before attempting assembly or operation. 2. Read and understand the warnings posted on the machine and in this manual. Failure to comply with all of these warnings may cause serious injury. 3.
28. Do not use the dust collector to dissipate fumes or smoke. Never pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. 30. Do not unplug the machine by pulling on the power cord – grasp the plug, not the cord. 31. Do not pull the machine by the power cord, or allow the power cord to contact sharp edges or hot surfaces. Replace a damaged cord immediately. 29. Do not insert fingers or foreign objects into the inlet ports.
5.0 Specifications Model number ............................................................................................................................................. JDC-501 Stock numbers: Dust collector............................................................................................................................................ 414700 Replacement filters (set of 2).....................................................................................................................
.1 Grounding instructions 6.0 Setup and assembly 1. All Grounded, Cord-connected Tools: Carton contents: 1 2 2 4 16 1 In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug.
or should be used with this tool. If the tool must be reconnected for use on a different type of electric circuit, the reconnection should be made by qualified service personnel; and after reconnection, the tool should comply with all local codes and ordinances.
.0 Maintenance Periodically empty the chip drawer, and clean out the interior of the dust collector. Keep the fan end of the motor clear of dust and debris. Replace filters after maximum 800 hours of use. See Figure 4. Figure 4 10.0 Replacement Parts Replacement parts are listed on the following pages. To order parts or reach our service department, call 1800-274-6848 Monday through Friday (see our website for business hours, www.jettools.com).
.1.
10.1.2 JDC-501 Dust Collector – Parts List Index No Part No Description Size Qty 1 ................ JDC-500001 .............. Front Cover .............................................................. ...................................... 1 .................. JDC-500001A............ Front Cover (serial no 1210047 & higher) .................. ...................................... 1 2 ................ JDC-500002 .............. Motor........................................................................
11.