Product Manual
Table Of Contents
- Variable Speed Mill-Drill Machines
- 1.0 IMPORTANT SAFETY INSTRUCTIONS
- 2.0 Table of contents
- 3.0 About this manual
- 4.0 Specifications
- 5.0 Setup and assembly
- 6.0 Electrical connections
- 7.0 Adjustments
- 8.0 Operation
- 9.0 User-maintenance
- 10.0 Troubleshooting JMD-45VS series Mill-Drills
- 11.0 Optional accessory
- 12.0 Replacement Parts
- 12.1.1 JMD-45VSPF, -45VSPFT Table and Base Assembly – Exploded View
- 12.1.2 JMD-45VSPF, -45VSPFT Table and Base Assembly – Parts List
- 12.2.1 JMD-45VSPF, -45VSPFT Column Assembly – Exploded View
- 12.2.2 JMD-45VSPF, -45VSPFT Column Assembly – Parts List
- 12.3.1 JMD-45VSPF, -45VSPFT Gear Head Assembly – Exploded View
- 12.3.2 JMD-45VSPF, -45VSPFT Gear Head Assembly – Parts List
- 12.4.1 JMD-45VSPFT Tapping Assembly – Exploded View
- 12.4.2 JMD-45VSPFT Tapping Assembly – Parts List
- 12.5.1 JMD-45VSPF, -45VSPFT Gears Assembly – Exploded View
- 12.5.2 JMD-45VSPF, -45VSPFT Gears Assembly – Exploded View
- 12.6.1 JMD-45VSPF Electric Box Assembly – Exploded View
- 12.6.2 JMD-45VSPF Electric Box Assembly – Parts List
- 12.7.1 JMD-45VSPFT Electric Box Assembly – Exploded View
- 12.7.2 JMD-45VSPFT Electric Box Assembly – Parts List
- 13.0 Electrical Connections, JMD-45VSPF series
- 14.0 Warranty and service
7
JMD-45VSPF JMD-45VSPFT
Weights
Net weight 761 lb (345 kg) 767 lb (348 kg)
Shipping weight 827 lb (375 kg) 833 lb (378 kg)
1
subject to local and national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height, D = depth
n/a = not applicable
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
4.1 Mounting hole centers
Figure 4-1: mounting holes for JMD-45VS series