User Manual

6
5.0 Specifications
Model number ............................................................................................................................................ JOSS-S
Stock number .............................................................................................................................................. 723950
Motor and electricals:
Motor type ............................................................................ totally enclosed fan cooled, induction, capacitor start
Horsepower ................................................................................................................................... 1 HP (0.75kW )
Phase......................................................................................................................................................... single
Voltage ........................................................................................................................ 115/230V (prewired 115V)
Cycle ........................................................................................................................................................... 60Hz
Listed FLA (full load amps) .......................................................................................................................... 11/5.5
Starting amps ................................................................................................................................................ 44A
Running amps (no load) ................................................................................................................................ 6.5A
Start capacitor ......................................................................................................................... 200MFD, 125VAC
Run capacitor ................................................................................................................................. 30μF 250VAC
Power transfer .................................................................................................................................... direct drive
Motor speed ........................................................................................................................................ 1720 RPM
Power cord .................................................................................................................................. 6 ft., 3x16 AWG
Power plug installed ....................................................................................................................................... 15A
Control switch ......................................................................................... push-button with paddle stop, safety key
Recommended circuit and fuse/breaker size
1
................................................................................................ 15A
Sound emission
2
................................................................................................. 80 dB at 100cm; 83 dB at 50cm
Worm gear:
Gear environment ..................................................................................................................................... oil bath
Oil reservoir capacity ....................................................................................................................................1.6 L
Recommended oil type ................................................................................................................ SAE 90 gear oil
Spindle:
Oscillations per minute ..................................................................................................................................... 75
Oscillation length ........................................................................................................................................ 1-1/2”
Spindle speed (RPM) ....................................................................................................................................1720
Spindle lock .................................................................................................................................................... yes
Materials:
Main table ................................................................................................................................... ground cast iron
Trunnion ....................................................................................................................................................... steel
Cabinet ........................................................................................................................................................ steel
Base ...................................................................................................................................................... cast iron
Sanding drums .......................................................................................................................................... rubber
Paint finish................................................................................................................. enamel and powder coating
Table:
Table dimensions .................................................................................................................. 24-1/2”W x 24-1/2”L
Table height from floor .............................................................................................................. 39-3/16” (995mm)
Table tilt .................................................................................................................................. 45° front, 15° back
Dimensions:
Cabinet footprint ............................................................................................................ 15” x 15” (381 x 381 mm)
Overall dimensions w/4”sanding drum ................................................................. 24-1/2”W x 24-1/2”L x 44-3/16”H
Overall dimensions, shipping ........................................................................... 29-15/16”W x 27-9/16”L x 44-1/2”H
Dust collection:
Dust port outside diameter ................................................................................................................. 4” (100mm)
Minimum extraction volume required ...................................................................................... 300 CFM (27 CMM)
Weights
Net weight ...................................................................................................................................... 216 lb (98 kg)
Shipping weight ............................................................................................................................ 256 lb (116 kg)
1
subject to local/national electrical codes.
2
the specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is only intended to allow the user to make a better estimation of the hazards and
risks involved.
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.