Assembly Instructions

Assembly and Parts Breakdown

JSG-6DC-CS Closed Stand with Casters

Assembly

1. Use the hardware bag provided to attach the JSG-6DC to the closed stand.

2. Attach the sander to the closed stand using four hex cap screws and four flat washers.

3. Inside the closed stand, use four flat washers, four lock washers and four hex nuts.

4. Tighten with a wrench.

JET

427 New Sanford Road

LaVergne, Tennessee 37086 Part No. M-708598

Ph.: 800-274-6848 Revision B1 08/2014

PAGE 1
Assembly and Parts Breakdown JSG-6DC-CS Closed Stand with Casters Assembly 1. 2. 3. 4. Use the hardware bag provided to attach the JSG-6DC to the closed stand. Attach the sander to the closed stand using four hex cap screws and four flat washers. Inside the closed stand, use four flat washers, four lock washers and four hex nuts. Tighten with a wrench. JET 427 New Sanford Road LaVergne, Tennessee 37086 Ph.: 800-274-6848 www.jettools.com Part No.
PAGE 2
Parts Breakdown Parts List Index No. Part No. Description Size Qty 1 ................ AB612062 ................. Closed Stand .................................................... ............................................. 1 2 ................ TS-0060111 .............. Hex Cap Screw ................................................. 3/8” x 2-1/2” ......................... 4 3 ................ TS-1550071 .............. Flat Washer ...................................................... M10 x 20 ........