Product Manual

5
28. Maintain a balanced stance at all times so that
you do not fall into the cutter or other moving
parts. Do not overreach or use excessive force
to perform any machine operation.
29. Use the right tool at the correct speed and
feed rate. Rotate spindle clockwise for right-
hand tools, counterclockwise for left-hand
tools. Do not force a tool or attachment to do a
job for which it was not designed. The right
tool will do the job better and more safely.
30. Use recommended accessories; improper
accessories may be hazardous.
31. Frequently clean this machine. Maintain tools
with care. Keep cutters sharp and clean for the
best and safest performance. Follow
instructions for lubricating and changing
accessories.
32. Turn off the machine before cleaning. Use a
brush or compressed air to remove chips or
debris — do not use your hands.
33. Do not stand on the machine. Serious injury
could occur if the machine tips over.
34. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until it comes to a complete stop.
35. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
36. Don’t use in dangerous environment. Don’t
use this machine in damp or wet locations, or
expose it to rain. Keep work area well lighted.
37. Some coolants used for machining contain
chemicals that may be hazardous to your
health if not used properly. Read and
understand all user information listed on the
coolant container and protect yourself
accordingly.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or
possibly even death.
4.0 About this manual
This manual is provided by Walter Meier (Manufacturing) Inc. covering the safe operation and maintenance
procedures for a JET Model JTM-1 and JTM-2 Turret Mill. This manual contains instructions on installation,
safety precautions, general operating procedures, maintenance instructions and parts breakdown. Your
machine has been designed and constructed to provide years of trouble-free operation if used in accordance
with the instructions as set forth in this document.
If there are questions or comments, please contact your local supplier or Walter Meier. Walter Meier can also
be reached at our web site: www.waltermeier.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
Read and understand the entire contents of this manual before attempting assembly
or operation! Failure to comply may cause serious injury!