Product Manual

ManualsBrandsJet ManualsMetal FabricationJET Bench Model Sheet Metal Slip Roller — 36in. x 22Ga.

Operating Instructions and Parts Manual

SR-2024M and SR-2236M Slip Rolls

WALTER MEIER (Manufacturing) Inc.

427 New Sanford Road

LaVergne, Tennessee 37086 Part No. M-756020

Ph.: 800-274-6848 Revision A 12/2010

Summary of content (8 pages)

PAGE 1
Operating Instructions and Parts Manual SR-2024M and SR-2236M Slip Rolls WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Ph.: 800-274-6848 www.waltermeier.com Part No. M-756020 Revision A 12/2010 Copyright © 2010 Walter Meier (Manufacturing) Inc.
PAGE 2
Warranty and Service Walter Meier (Manufacturing) Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools.
PAGE 3
For your own safety, read the owner’s manual before operating the slip roll. This slip roll is designed and intended for use by properly trained and experienced personnel only. If you are not familiar with the proper and safe operation of a slip roll, do not use until proper training and knowledge has been obtained. 1. KEEP GUARDS IN PLACE and in working order. 2. KEEP ALL BODY PARTS AWAY FROM MOVING PARTS. Avoid placing any part of your body near belts, cutters, gears, etc. 3.
PAGE 4
Specifications: SR-2024M SR-2236M Stock Number................................................................. 756020 .................................................. 756026 Capacity (mild steel) ....................................................... 20 .................................................................. 22 Maximum Forming Length .............................................. 24” ................................................................ 36” Number and Diameter of Rolls .........
PAGE 5
Breakdown for the SR-2024M & SR-2236M Slip Roll 5
PAGE 6
Parts List for the SR-2024M & SR-2236M Slip Roll Index Part No. No. Description Size Quantity 1.......... SR2024N-1 ...................Base Assembly...................................... ............................................... 1 ............ SR2236N-1 ...................Base Assembly...................................... ............................................... 1 3.......... SR2024N-3 ...................Lever ..................................................... ..........................
PAGE 7
PAGE 8
WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Phone: 800-274-6848 www.jettools.com www.waltermeier.