Installation Manual

CONFIDENTIAL
RF Module Installation Manual
JETCO Model JTR-01
February 27, 2019
JTR-01 RF Module - Installation Manual.docx 2019-02-27 Page
5
of 8
RF Module Setup
Connect the RF Module to the serial device it’s meant to communicate with. The device
must supply 3.3V to 5V power, at a minimum of 200 ma, to the RF module through the
USB port and serially communicate through the USB port at 115,200 baud. The device
must support messages that are entirely ASCII and are terminated by the ASCII carriage
return character.