Quick Set-Up Guide Model number: SC435
Jethro SC435 Set-Up Guide Table of contents My phone.................................................3 Getting Started........................................ 5 Using the Phone...................................... 6 Saving Contacts to Phonebook............... 7 Changing the ringtone.............................8 Setting up the SOS function.................... 9 Setting up the Speed dial...................... 10 Meeting (Vibrate only) mode................12 Enable Talking Keypad...........................
My phone 3
Figure SC435 1 Earphone jack 2 Volume key 3 Microphone 4 Receiver 5 LCD 6 Keypad 7 Camera 8 Torch 9 SOS Key 10 USB Jack 11 Speaker 12 Charging cradle 13 Battery 14 SIM 15 TF Card 4
Getting Started Inserting a SIM card Remove (opening the battery in the cover bottom left-hand corner) Slide the SIM card into the SIM card holder with gold contacts facing down.
Inserting and battery Insert the battery, making sure that battery contacts touch the gold contacts, then place the battery cover and press down until it clicks into place. Using the Phone In standby mode the phone is one, but is not running any applications (call, SMS message, etc.). Using the menu Press Left menu key (left 3-dot key) to open the menu. Press Up/Down arrow keys to flick through the menu items. Press Left menu key to open a menu item.
Dual-function keys Some keys have additional functions if they are pressed and held down for a few seconds. Number 1 key: Listen to mailbox. # (Pound) key: Switch between normal mode and meeting (vibrate only) mode. Number 0 key: Torch on continuously when the phone is on. Saving Contacts to Phonebook Contacts/Phonebook can be accessed by pressing the right menu key (right 3-dot key) OR pressing the left menu key (left 3-dot key) in standby mode, selecting Phonebook -> OK 1.
3. To input phone number, press the down arrow button to move the highlight to Mobile or Home number, press edit, press OK when finish. Please note: You can assign specific ringtone to each contact. Simply move the highlight to Default ringtone, press Edit then select ringtone from Phone ringtones or your own sound files. Changing the ringtone Press the Left Menu key in standby Mode Scroll to and select Settings 1. Select Profiles 2. Select Normal (or your current Profile) 3.
5. Choose ringtone from Fixed ringtones (comes with the phone) or More ringtones (download from your computer to phone memory or optional MicroSD card) 6. Press OK Done to return to the previous menu. 7. Repeat step 3 and 4, select Message ringtone to change incoming message ringtone. Setting up the SOS function 1. Press the Left Menu key (on keypad) 2. Scroll to and select Settings 3. Select SOS setting OK (Ensure Status is checked), scroll to Set SOS numbers Select 4. Select No. 1.
previously programmed it will be empty) 5. You can use keypad to key in the SOS contact numbers, or press Contacts to choose a saved contact from Phonebook. 6. Press Save. 7. Repeat steps 5-7 to add up to 6 SOS contacts. When activated, the phone will dial the phone numbers in order of entry. 8. Select SOS message. 9. The default SMS is “SOS!!” To change this, press the right menu key to clear the message and Edit your own words. Press Save after done.
automatic answering feature please test before use. Setting up the Speed dial Please note: A valid SIM card needs to be installed in order to set up the Speed dial function. Speed dial function can be accessed by pressing the down arrow key in standby mode or Press the left Menu key in standby mode, select Phonebook OK, press Options Others OK Speed dial, then press OK. 1. Select 2. (If no number has been previously programmed it will say “Empty”), press Options Edit 2.
saved contact from Phonebook. Press OK after done. 3. Repeat steps 1-2 in order to save phone numbers against keys 3-9. When in Set numbers, the number on the left of the screen represents the key number the phone number will be saved to. Phone numbers saved to speed dial are dialled by pressing the associated number key (e.g. “2”) for three seconds in standby mode.
Enable Talking Keypad 1. Press the Menu button (on keypad) 2. Scroll to and select Settings 3. Scroll to and select Profiles 4. Scroll and select Human Voice 5. Press Options Activate Restore factory settings 1. Press the Menu button (on keypad) 2. Scroll to and select Settings 3. Scroll to and select Restore factory settings 4. Enter password (default 1234) 5. Press OK, then OK to confirm Please note: By performing this function, all settings will be restored to factory default.
erased. Please ensure backup all your contacts to SIM card before performing this function. Technical Data GSM: 850/900/1800/1900 MHz UMTS/WCDMA: 850/1900 MHz Dimensions: 104mm x 53mm x 18.4mm Battery: Li-ion 4.2V/1000mAh (replaceable) Internal antenna: SAR 0.44W/kg (head), 0.
Bluetooth: Bluetooth® v2.1 + EDR FCC Caution § 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Ope ration is subject to the condition that this device does not cause harmful interference. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user.
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
-Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This Jethro 3G Slide Senior Cell Phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
tested for typical body-worn operations with the back of the handset kept 15mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 15mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.
meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. IC Caution. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
brouillage est susceptible d'en compromettre fonctionnement. Contact us: Jethro Trading Ltd. Toll-Free: 1-888-509-6199 Company website: www.jethroshop.
