User manual

alarm tone 2 step 100Hz
minimal voltage actual voltage
maximal voltage
alarm tone 1 step 100Hz
- no signal 0 bad signal 9 the best signal
antena activity state reduced Tx power indicator
no. of Tx channels
actual voltage alarm voltage
10mW (Reduced) 10/100mW (Fr)
100mW (max.)
Testing beeper on each alarm Button down starts test
Rx Mx
Rx: 0000 0000
Tx: 0000 0000
Alarm Level
Ant1: 9 Ant2: 9
0 to 9
Input Mode
PPM standart
PPM standard
PPM v2 (2x) PPM v3 (1.3)
Alarm Error PPM
On
ON OFF
The menu structure of the transmitter module by the JETIBOX Diagram
Volt Min/ACT/MAX
10.0/10.0/11.5
Rx signal Level
Ant1: 9 Ant2: 9
Sound test
Rx Found
MeasureOrSetting
Main Setting
Volt ACT/ALARM
10.0V / 8.5V
Mx Tone1
3900 Hz
Mx Tone2
2000 Hz
RF Output Power
100mW (max.)
Diag A2 PS
RangeTest B
Transmitter Type
Duplex Tx
MeasureOrSetting
Measure
Duplex TX
EX FW ver. 3.00
ImpDiag
K7
Tx
Rx: Ant=9/9 5.0V 43.2A 21.4V