User manual

computer radio control system

4. 4.

between recording of proportional or two-state values (0% – 100%).

The control positions are recorded with a fixed period of 0.2s. The

data is a part of the standard telemetry record and can be displayed

as the other parameters.

This application can easily be used as a marker to highlight

interesting situations during the flight.

Conversion of Units

1. The voice synthesized telemetry units can be expressed in either

metric or US units. It is also possible to display the telemetry units on

the main screen in either format as well. The temperature is

automatically converted according to the option selected in the

Configuration menu. Conversion of the other units is accessible

through the Sensors/Logging menu. You can choose from the

following units:

Distance:

Metres (m), kilometres (km), feet (ft.), yards (yd.), miles (mi.).

Speed:

Metres per second (m/s), kilometres per hour (km/h), feet per second

(ft/s), miles per hour (mph) and knots (kt.).

Deleting a sensor

Above the „F3” function button the transmitter shows the number

of detected telemetry parameters from sensors and it is possible to

reset any unnecessary entry using the „F4” button. However, if the

button whose parameter has been deleted is still connected, the

parameter will later be re-loaded. The transmitters can detect up to

32 telemetry items.

9.4.6 Displayed Telemetry

This menu lists all of the user information blocks which are displayed

on the desktop. You can use this menu to manually add, delete,

rename and resize the user information blocks displayed on the

desktop.

User Block Overview:

"Flight mode" - Name of the current flight mode

„Voltage Rx“ - Receiver Voltage

121