User manual

computer radio control system
EN
2. Trim Travel Global or Separate Setting
The servo trim position for each function output can be set either
collectively for all flight modes by selecting the “G-(globe symbol)”
or individually for each separate flight mode by selecting “S-
Separate”.
9.2.4 Dual Rate/Exponential
This menu allows you to set up dual or triple rates for any of your
created output functions. Any of the channels can be set with
dual/triple rates and custom exponential settings. Exponential
settings can significantly increase your control precision by making
your stick movements (around center point) yield less control
movement. At the same time, the end points of the control surface
throw can be set to its extremes.
4. 4.
Channel namea)
Dual/Triple rate travel settingb)
Exponential settingc)
Global or separate flight mode settingd)
By highlighting one of the channels and either pressing the “F4
(Edit)” button or by pressing the “3D Control” button you will
access the individual control‘s settings page.
Channel name and global/separate settinga)
Current switch positionb)
c
d
a
b
a
f
b
c
d
e
86