User's Manual

Jetlun Corporation
Jetlun Gateway User Guide rev 0.3 DRAFT
20


RD71206

IMPORTANT: The Setup > HomePlug AV screen
provides an interface to configure the NEK on the
Energy Manager Plus only. To configure the NEK for
other remote HomePlug AV devices, please follow the
instructions that came with that HomePlug AV device.
Figure 14: HomePlug AV NEK screenshot
To change the NEK on the Energy Manager Plus, please enter the new
NEK under the left column (A) and click Apply. The right column (B)
identifies other HomePlug AV devices on the network with the same NEK.
4.2.2.5 HPCC Network
The Setup > HPCC Network screen allows you to configure the security
of your HPCC network. If you want HPCC devices such as the Jetlun
Appliance Module (RD75613) to join the network automatically, select
Auto and click Apply. If you prefer to authenticate each device manually
first, select Approval and click Apply.
Please note: Any device added manually (by clicking Approval) will NOT
automatically show up in the Home Area Network Overview screen (see
next section, 4.2.3.)
A B