User's Manual

Jetlun Corporation
Jetlun Gateway User Guide rev 0.3 DRAFT
22
!
!
!
RD75606
!
default encrypted (case-sensitive!) password is
HomePlugAV. If you do not set up security, anyone
nearby with a Powerline network can use this to gain
access to your network.
IMPORTANT: The Setup > HomePlug AV screen
provides an interface to configure the NEK on the
Gateway only. To configure the NEK for other remote
HomePlug AV devices, please follow the instructions that
came with that HomePlug AV device.
Figure 14: HomePlug AV NEK screenshot
To change the NEK on the Gateway, please enter the new NEK under the
left column (A) and click Apply. The right column (B) identifies other
HomePlug AV devices on the network with the same NEK.
4.2.2.5 HPCC Network
The Setup > HPCC Network screen allows you to configure the security of
your HPCC network. If you want HPCC devices such as the Jetlun
Appliance Module (RD75613) to join the network automatically, select
Auto and click Apply. If you prefer to authenticate each device manually
first, select Approval and click Apply.
A
B