User's Manual

Jetlun Corporation
Jetlun Occupancy Sensor User Guide rev 0.1 DRAFT
5

RD77760


2.0 PRODUCT OVERVIEW
Thank you for choosing the Occupancy Sensor (RD77760). The Occupancy Sensor is
designed to communicate with JIM Gateway via Radio Frequency (RF) to provide
remote control of your zigbee-enalbe device such as appliance module.
The Occupancy Sensor is a Zigbee® enable device. In the Zigbee® network, the
Occupy Sensor is designed to act as enddevice. Set a chain of events using the status
of occupy sensor to control groups of zigbee-enalbe devices in the gateway network. It
also can alert through email or SMS when battery volume is low.
It has the features as following:
z Join/Leave Network LED
z Power LED
z Occupy/Unoccupied LED
z This is a Zigbee® controller
z Two way communication
z RF Reliability
z Compatible with other Zigbee enabled devices
2.1 Package Contents
When you first open the box, please check and confirm that the following items are all
included:
• 1x Occupancy Sensor RD77760
• 1x Quick Installation Guide
Contact the retailer where you made your purchase if any of these parts are incorrect,
missing or damaged. Keep the carton, including the original packaging materials in case
you need to return the unit for repair.
2.2 Front Panel