User's Manual

Jetlun Corporation
Jetlun Occupancy Sensor User Guide rev 0.1 DRAFT
7

RD77760


Table 3: Back Panel of the Occupancy Sensor Description
The Zigbee Network button is applied for the Occupancy
Sensor to join or leave the network.
Press the Zigbee Network button once to join the network if
the sensor is not in the network.
To remove the sensor from the network, press the Zigbee
Network button once to leave the network.
2.4 Side Panel (Left)
Figure 3: Left Side Panel of Occupy Sensor
Table 4: Back Panel of the Occupancy Sensor Description
DC IN The DC IN is used to provide the power for Occupancy by
DC adapter when no battery in the sensor.
The output voltage for adapter is 9V, output current is 0.3A