User Guide

28
SDRAM RAS-to-CAS Delay
This field let’s you insert a timing delay between the CAS and RAS strobe signals, used when DRAM
is written to, read from, or refreshed. Fast gives faster performance; and Slow gives more stable
performance. This field applies only when synchronous DRAM is installed in the system. The
settings are: 2 and 3.
SDRAM RAS Precharge Time
If an insufficient number of cycles is allowed for the RAS to accumulate its charge before DRAM
refresh, the refresh may be incomplete and the DRAM may fail to retain date. Fast gives faster
performance; and Slow gives more stable performance. This field applies only when synchronous
DRAM is installed in the system. The settings are: 2 and 3.
3-7 Integrated Peripherals
CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
Integrated Peripherals
Item Help
On-Chip IDE Function Press Enter
On-Chip SIO Function Press Enter
On-Chip Device Function Press Enter
Init Display First PCI Slot
Power On Function BUTTON ONLY
KB Power ON Password Enter
Hot Key Power ON Ctrl-F1
POWER After PWR-fail off
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
On-Chip IDE Function
Please refer to section 3-7-1
On-Chip SIO Function
Please refer to section 3-7-2
On-Chip Device Function
Please refer to section 3-7-3
Init Display First
This item allows you to decide to activate whether PCI Slot or on-chip VGA first. The settings are:
PCI Slot, AGP Slot, On-Chip VGA.
Power On Function
This function allows you to select the item to power on the system. The settings are: Button Only,
Mouse Left, Mouse Right, Password, Hotkey, and keyboard 98.
Power After PWR-Fail
This option will determine how the system will power on after a power failure.