User Guide

21
This connector connects to a LAN card with a WAKE ON-LAN output. This
connector power up the system when a wake up signal is received through the
LAN card.
NOTE:
This feature requires that Wake On LAN or Ring In Wake up is enabled.
Wake-On-LAN Headers
WOL
1
3
5VSB
GN D
WON
(10) FAN Speed Headers (3-pin): CPUFAN, SYSFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending
on the fan manufacturer, the wire and plug may be different. The red wire should
be positive, while the black should be ground. Connect the fan’s plug to the
board taking into consideration the polarity of connector.
SYSFAN
1
3
CP UFAN
1
3
(11) IR infrared module Headers (9-pin): IR
This connector supports the optional wireless transmitting and receiving infrared
module. You must configure the setting through the BIOS setup to use the IR
function.
Infrared Module Headers
IR
I RRX
GND
IRTX
VCC
1 6
5 10
CI R
CI RRX
IOVSB
NC
NC
NC
IR: (Pin1
∼
Pin5) for Standard IR
CIR: (Pin6
∼
Pin10) for Consumer IR
(12) CD Audio-In Headers (4-pin): CD
_
IN, CD
_
IN2
CD
_
IN and CD
_
IN2 are the connectors for CD-Audio Input signal. Please
connect it to CD-ROM CD-Audio output connector.