Instructions / Assembly

AND ARE REGISTERED TRADEMARKS OF JOHN GUEST INTERNTIONAL LIMITED © COPYRIGHT 2016
To Connect
To Disconnect
KEEP PRODUCT CLEAN IN A BAG UNTIL READY TO USE.
1. Cut the pipe square, removing all burrs and sharp edges.
2. Insert pipe fully into tting.
3. Turn locking cap quarter turn clockwise to locked position;
audible click will be heard; indicator marks will be aligned.
1. Depressurize the system.
2. Turn locking cap quarter turn counter clockwise.
3. Depress collet against the tting and remove pipe.
Tube Stop O-Ring
Support Washer Stainless Steel
Teeth Grip Pipe
Collet