Operation Manual

ENGLISH

size: A6 (105x148mm)

CONNECTING AN EXTERNAL DEVICE

• Using the AUX IN jack (7), an external music player (e.g. MP3 player)

can be connected to this device and music can be played over the

loudspeakers.

• Attention: Before connecting your external playback device, please

also read the operating instructions for information regarding safety

instructions and usage with other devices.

• Turn off this device and the external playback device.

• Connect the external playback device using a stereo cable (Ø3.5 mm).

The cable is not included in the scope of delivery.

• Connect the stereo cable with the AUX IN jack (7) and put the other

end into the headphone jack or the LINE-OUT jack of the playback

device. If the external device has a smaller or larger socket, then use a

corresponding adaptor (not included in the scope of delivery).

• First turn on the external device and set the volume to zero. Then turn this

device on and set the volume to MIN.

• Slide the switch STANDBY/FM (5) to position FM.

• Now you can regulate the volume of both devices. If this device is

connected via the LINE-OUT jack on the external device, then regulate the

volume on this device.

• However, playback is controlled using the external device.

• Please note that if you only turn off this device, the external playback

device will continue playing.

JGC-LSR-4030-IM-DE-EN-V1.indb 26 09/03/2010 11:17 AM