Operation Manual

LOCATION OF CONTROLS

ENGLISH

1. 3.5mm STEREO HEADPHONE JACK

2. SD CARD JACK

3. LC DISPLAY

4. USB INTERFACE

5. CD DOOR

6. REMOTE SENSOR

7. CLOCK/MEMORY BUTTON

8. REPEAT BUTTON

9. BUTTON

10. BUTTON

11. STOP BUTTON

12. STANYBY/ON BUTTON

13. 360° ROTARY VOLUME

14. FUNCTION BUTTON

15. BAND BUTTON

16. PLAY/PAUSE BUTTON

17. AC CORD

18. FM ANTENNA

19. SPEAKER OUTPUT JACK

CAUTION:

Usage of controls, adjustments, performance or procedures other than those specified herein may result

in hazardous radiation exposure. This unit should not be adjusted or repaired by anyone except a qualified

service person.

IMPORTANT:

Since movement of the CD mechanism and the sensitive circuitry may cause interference to the radio

tuner nearby, switch this unit off while operating other radio devices.

PRECAUTIONS FOR USE

INSTALLATION

Unpack all parts and remove protective material. Do not connect the unit to the power outlet before

checking the voltage and before all other connections have been made. Do not cover any vents and

make sure that there is a space of several inches/centimeters around the unit for ventilation.

CONNECTION

1. Connect the power cord to AC outlet.

2. When you first plug the unit into the power outlet, the unit will go into standby mode, the display

will blink the un-set clock.

3. Connect the speaker wire to the speaker terminal located on the rear side of the unit.