Operation Manual

FLASH MEMORY / MAINTENANCE

ENGLISH

1. Press FUNCTION key to select CARD-USB mode

2. Display will show CARD-USB

3. Plug in USB Memory Stick into USB Port or insert SD or MMC card with label facing up in card slot

4. Display will show total track number

5. Press

PLAY/PAUSE to start music playing

6. Press or to select tracks

7. Repeat function can be selected identical to CD/MP3 playback

8. Press

STOP to end playback

Note : Due to fast changing IT technology, this unit may not be compatible with some USB or SD/MMC

flash storage device.

* USB support Specification : USB V1.1/V2.0

USB / SD-MMC FLASH MEMORY PLAYBACK

MAINTENANCE

CARE OF THE COMPACT DISC

• To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the

edges.

• Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth. Unlike conventional

records, compact discs have no grooves to collect dust and microscopic debris. Wiping with a soft cloth should remove

most particles. Wipe in a straight line from the inside to the outside of the disc. Small dust particles and light stains will

have absolutely no effect on reproduction quality.

• Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the disc.

If necessary, use a CD cleaning kit.

• Never write on or affix labels to the surface of compact discs.

CARE OF THE CABINET

If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax,polish sprays, or abrasive cleaners on the

cabinet.

CAUTION:

Never allow any water or other liquids to get inside the unit while cleaning.