Operation Manual

ENGLISH

BASIC FUNCTIONS

Automatic switch off

This system provides a timer function. You can set the appliance to switch off automatically after a period of •

90 to 10 minutes.

During operation press repeatedly the • SLEEP button (51) to reduce the time in 10 minutes increments.

Adjust the remaining time to switch-off.

After a few seconds the normal display appears and additionally an icon is displayed: •

Notes:

You still can switch off the appliance with the • STANDBY/ON button (8) before the switch off time has

elapsed.

If you use the automatic switch off time in CD mode it might be possible that the CD is played to the end •

before the automatic switch off. For example if the switch off time is set to 90 minutes and the CD play time

is 45 minutes the CD playback ends before the set switch off time.

Set the time

After the power plug is connected to a wall outlet --:-- is ﬂashing in the LCD display (3).•

The time can only be set in standby mode. •

Press and hold the • MEM/C-ADJ. button (52).The display shows 24 HOUR.

Press • (39) or (40) to select 24 or 12 hour time format. Conﬁrm your selection with the MEM/C-

ADJ. button.

The hour digits will ﬂash. Press • (39) or (40) to set the hour and conﬁrm with the MEM/C-ADJ.

button. Set the minutes in the same way.

After setting and saving the minute digits the time is displayed and the appliance will switch to standby •

mode (without backlight).

Notes:

If no button is pressed within 10 seconds, the time setting function ends and the display will switch to •

standby mode.

If you pull the power plug or switch off the appliance with the power switch (25), the time settings will be •

cleared. Set the time again.

JGC-MS-203-01.indb 32 6/3/09 9:44:01 AM