Operation Manual

ENGLISH
33
BASIC FUNCTIONS
Set timer
You can set a time at which the appliance will switch on or off and playback radio, CD or another audio •
source (USB flash memory, SD/MMC card).
The switch-on/off time can be set while the appliance is switched on or in standby mode.•
Press the • TIMER button (53) to set the switch-on time. The
display (3) shows ON and 00:00 (Fig. 2).
Adjust the hour digits with • (39) or (40) and confirm
with the TIMER button.
Set the minutes in the same way and confirm with the • TIMER
button.
The display shows • OFF and 00:00 (Fig. 3).
Set the switch-off time (hours, minutes) as described above.•
After pressing the • TIMER button TUNER will flash on the
display. Select with (39) or (40) the desired audio
source (TUNER, CD, USB, CARD).
Fig. 2
Fig. 3
Confirm your selection with the • TIMER button.
Set the volume with • (39) or (40) and confirm your selection with the TIMER button.
The LCD display shows all settings again as running text. Then it switches to the normal display and •
additionally the clock icon is displayed:
If you press the • TIMER button again the timer function will be switched off.
Notes:
If • ERROR is displayed after the switch-off time setting, the time input is not correct (switch-on time same as
switch-off time). After a few seconds you can input the switch-off time again (as described in paragraph Set
time).
If no button is pressed within 10 seconds, the set timer function automatically ends.•
JGC-MS-203-01.indb 33 6/3/09 9:44:02 AM