Operation Manual

ENGLISH
39
CD PLAYER
Programming CD tracks
Programme the CD player to play a user-defined playlist of up to 64 tracks (for MP3/WMA files). Press the •
stop button (37) before starting to programme tracks.
Press the • MEM/C-ADJ. button (52) to switch to programme
mode. The display shows MEMORY and the storage place
number P--01. The track number 00 flashes (Fig. 9).
Choose the folder with • (41) or (42) and confirm your
selection with the MEM/C-ADJ. button.
The track number • 00 flashes in the display (Fig. 10).
Choose a track with • (39) or (40) and confirm your
selection with the MEM/C-ADJ. button.
The display shows the next storage place number. Repeat •
above steps to programme more tracks.
Fig. 9
Fig. 10
Press • (38) to start the programmed playback.
Press the stop button (37) to end the programmed playback. Start the programme playback again by •
pressing (38).
Press the stop button (37) to delete the programme. The programme will also be deleted if you open the lid •
of the CD compartment, press the FUNCTION button (36) or the STANDBY/ON button (32).
Notes:
The repeat function can be combined with playing a programme. Refer to paragraph • Repeat function.
If no button is pressed within 10 seconds, the track programming ends.•
JGC-MS-203-01.indb 39 6/3/09 9:44:03 AM