Operation Manual

ENGLISH
37
CD PLAYER
Track search, fast forward and rewind
• Press (41), to go to the beginning of the next track.
• Press (53), to go back to the beginning of the track which is playing. Press button twice to go back to
the beginning of the previous track.
• If you press and hold these buttons the playback speed will increase. As soon as you release these buttons
the playback will resume to normal speed.
Random playback
• Press the RANDOM button (49) to playback all tracks in a random sequence. RANDOM is shown on the
display (1).
• Switch off the function by pressing the RANDOM button again.
Track sample
• You can play all CD tracks one after the other for 10 seconds long.
• In stop mode, press the INTRO button (51) to switch the function on. The display shows INTRO. The first
track on the CD will start playing.
• If you press the INTRO button during playback the device will start track sampling with the current track
being played.
• Press the INTRO button again to switch the function off.
Repeat function
• You can set this function during playback of a track or in stop mode.
• Press the REPEAT button (50) once in order to repeat the track being played. REPEAT will be shown on the
display.
• Press the REPEAT button twice to repeat the entire CD. REPEAT ALL will be shown on the display.
• Press the REPEAT button three times to switch off the function.
Program track playback
• You can program the CD player to play a desired sequence of up to 64 tracks. Press the stop button (42)
before starting to programme tracks.
• Press the MEM/C-ADJ. button (45) to switch to
programming mode. The display shows MEMORY and the
storage place number P--01 (Fig. 7).
• Select a track with (53) or (41) and confirm the
selection with the MEM/C-ADJ. button (45).
• The next storage place number will be shown on the
display. Proceed as above to program other tracks.
Fig. 7
• Press (40), in order to begin the playback of the programmed tracks.
• Press the stop button (42) to end the program playback. Start the program again by pressing (40).
JGC-MS-2305-IM-DE-EN-V2.indb 37 07/08/2009 5:09 PM