Operation Manual

ENGLISH

CD PLAYER

• To erase this program, press the stop button (42) twice. The programme will also be erased if you open the

CD compartment (11), press the FUNCTION button (36) or the STANDBY button (33).

Notes:

• The repeat function can be combined with playing of a programme. Refer to paragraph Repeat function.

• If you do not press any buttons for 10 seconds, the track programming will be cancelled.

Anti Shock Function (ESP)

• In case your device is exposed to shock or vibration, this function will prevent music interruptions (40

seconds for Audio CD; 100 seconds for MP3/WMA-CD).

• Press the button ID3/ESP (52). ESP will ﬂash in the display (1) during CD playback.

• Switch off the function by pressing the button ID3/ESP (52) again.

Note:

• During MP3/WMA-CD playback, the anti shock function is always switched on and can not be switched off.

Playback MP3/WMA-CD

• In the following section the differences in playing a MP3/WMA-CD are described

• Since the MP3/WMA-CDs can contain many more tracks, it could take longer until the CD player has read

all of the contents. On the LCD-Display (1) the number of directories and the number of tracks are shown. A

maximum of 99 directories and 999 tracks can be read.

• According to available ﬁles, MP3 or WMA will be shown

(Fig. 8).

• If there are folders on the MP3/WMA-CD, use DN (55)

or UP (56) to select the previous or next folder.

Fig. 8

Repeat function

• There are three repeat options when playing a MP3/WMA-CDs.

• Press the REPEAT button (50) once in order to repeat the track being played. REPEAT will be shown on the

display.

• Press the REPEAT button twice to repeat the entire CD. REPEAT ALL will be shown on the display.

• Press the REPEAT button three times to repeat the album being played. REPEAT ALBUM will be shown on

the display.

• Press the REPEAT button four times to switch off the function.

JGC-MS-2305-IM-DE-EN-V2.indb 38 07/08/2009 5:09 PM