Operation Manual

ENGLISH

USB FLASH MEMORY AND SD/MMC MEMORY CARD

• Make sure the device is in standby mode. Insert the USB ﬂash memory carefully into the USB jack (21), and

the SD/MMC memory card into the memory card slot (4).

• Switch on the device by pressing the STANDBY button (33).

• Press the FUNCTION button (36) to select the operation mode USB for USB ﬂash memory or SD/MMC for

memory cards.

• The functions for MP3/WMA-CD also apply to USB drives and memory cards. For more information please

refer to chapter CD Player.

• Do never remove the USB ﬂash memory or the SD/MMC memory card from the connector when you are just

playing a track. Always stop the current track with the stop button (42).

• Change the operating mode or switch off the device completely before removing the USB ﬂash memory or

the SD/MMC card from the jack/slot. This prevents damage of the USB ﬂash memory, the SD/MMC card and

ﬁles.

Notes:

• The USB jack (21) can be used with standards 1.1 and 2.0.

• If you are not using the USB jack, always put on the included rubber cap

• The device only supports USB storage and SD/MMC memory card with a capacity of up to 2 GB.

• The device can only playback MP3 or WMA audio ﬁles.

• Due to changing technologies, it may happen that certain USB storage or SD/MMC cards are not compatible

with this device.

• Do not use USB extension cable to connect your USB memory with the USB jack. It can cause interference

which can affect music playback. In extreme cases, the USB memory may be damaged.

JGC-MS-2305-IM-DE-EN-V2.indb 40 07/08/2009 5:09 PM