Operation Manual
Tuning
• Press BAND button to select the frequency
band.
• Press and hold the and button to scan
to next available station with good enough
signal.
• Momentarily press and button to
manually tune to the desired frequency.
You can select the desired station by entering
the direct frequency on the numeric keypad.
• Choose the band (AM or FM) by BAND button,
then press
AM (in AM mode) or FM (in FM
mode), frequency reading will disappear.
• Enter the frequency with the numeric keypad
and press
AM (in AM mode) or FM (in FM
mode) to confirm.
• The selected frequency must be within the
frequency range for AM or FM band, otherwise
the display will show ERR
Valid frequency ranges:
FM: 87,5 - 108,0 MHz
AM: 522 - 1620 kHz
11
ENGLISH