Operation Manual

20
ENGLISH
PREPARATION, RADIO
Unpacking and checking
Remove all packaging and check the appliance for damage.•
Do not use the appliance if it is damaged in any way. Bring it back to the dealer immediately.•
Open the CD compartment and remove the transport protection.•
Battery operation
Open the battery compartment and insert six C-Cell (UM-2/LR14 type) batteries. Please observe •
correct polarities. The batteries are not included.
• Note: When the set is only used with “AC“ or is not used for 4 weeks or more, please remove the
batteries, to avoid damage to the set from leakage of batteries.
Also observe the safety instructions for handling batteries (“Important safety instructions”).•
Bottom View
Headphone jack
This unit is equipped with a stereo headphone jack (3.5mm diameter) which accepts most standard •
earphones & headphones (not included).
When the plug of a standard headphone or earphone is inserted into this jack, the built-in speakers •
will automatically be disabled.
When the headphone or earphone is disconnected, the speakers will be activated.•
Radio operation
Set the function switch to the desired band (• AM, FM or FM ST.).
Rotate the tuning control knob to tune in to the desired station.•
Adjust the telescopic antenna (for FM/FM ST) or position of the set (for AM) to obtain the best •
reception.
Adjust the volume control knob to the desired level.•
To turn off the radio, slide the function switch to • TAPE (OFF).
RRMP-6770.indd 20 5/8/09 10:21:32 AM