Operation Manual

ENGLISH
22
ENGLISH
Repeat function
At any time during playback, press the CD • REPEAT key as follows.
Press the CD • REPEAT key once to repeat the current track.
Press the CD • REPEAT key twice to repeat all tracks on the CD.
Programming the CD player
The CD player can be programmed to play any sequence of up to 20 tracks, as desired. Always •
press the CD STOP key before starting the programming.
Press the CD • PROGRAM key. The display will show PROG and the 01 will flash to indicate that
the CD player is now in memory programming mode. At the first memory position, press the CD
BACK or CD NEXT key to select the track you wish to be stored in the first memory position, and
press the program key to confirm your selection.
When you press the CD • PROGRAM key the display will advance to the next memory position
(e.g. 02).
Repeat the previous two steps each time selecting any track number of your choice to be stored in •
the successful memory positions.
After each track number remember to press the CD • PROGRAM key.
After a maximum of 20 songs (or less) have been selected as described above, press the CD •
PROGRAM key.
The display will now show the exact track sequence in memory by displaying all the track numbers •
rapidly. Also, the PROG symbol will be shown to indicate that you have saved a program memory
sequence.
Press the CD • PLAY/PAUSE key to play back the saved sequence in the program memory.
To clear the entire program which is stored in the memory, simply press the CD • STOP key twice
or put the function switch to OFF.
CD PLAYER
RRMP-6770.indd 22 5/8/09 10:21:32 AM