Operation Manual

ENGLISH
34
CD-PLAYER
Track search, fast forward and rewind
• Press (32) to go to the beginning of the next track.
• Press (37) to go back to the beginning of the track which is playing. Press twice to go back to the
beginning of the previous track.
• If you press this button for a longer time, the speed will increase. As soon as you let go of the button, the
playback returns to normal speed.
Skip function
• Press the SKIP+10/FOLDER/MEM.SET button(33) to skip 10 tracks.
• This function is particularly useful when playing a MP3-CD that normally contains a large amount of tracks.
• Use this button to skip tracks and get near the desired track. Then select the track with (37) or (32).
Repeat function
• You can set this function during playback of a track.
• Press the REPEAT/PROG/MEMORY button(36) once in order to repeat the track being played. will be
shown on the display. The symbol flashes.
• Press the REPEAT/PROG/MEMORY button twice to replay the entire CD. will be shown on the display.
The symbol does not flash.
• Press the REPEAT/PROG/MEMORY button three times to switch off the function.
Program track playback
• You can program the CD player to play a desired sequence of up to 60 tracks. Press the /STOP/
FM.MODE button(31) before beginning programming.
• Press the REPEAT/PROG/MEMORY button (36) to switch to programming mode. PROG and the program
place number P--01 will be shown on the display. The track number digits 00 flash.
• Select a track with (37) or (32) and confirm your selection with the REPEAT/PROG/MEMORY
button.
• The next program place number will be shown on the display. Proceed as above to program other tracks.
• Press the /BAND button (38) in order to begin the playback of the programmed tracks. PROG will be
shown on the display.
• Press the /STOP/FM.MODE button (31) to end the program playback. Start the program again by
pressing the /BAND button(38).
• To erase this program, press the /STOP/FM.MODE button (31) twice. The program will also be erased if
you open the CD door or set the FUNCTION switch (19) to another position.
Note:
• The repeat function can be combined with playing of a program. Read the Repeat function section.
JGC-RRMP-6910-IM-DE-EN-V2.indb 34 11/08/2009 1:13 PM