Operation Manual
ENGLISH
37
CASSETTE RECORDER
Inserting and removing cassette
• Set the FUNCTION switch (19) to TAPE (OFF).
• Open the cassette compartment (13) by pressing the / button(26).
• Tighten the band slightly and insert the cassette with the band to the top. The empty spool should be on the
left.
• Close the cassette compartment until it audibly locks.
• Start play by pressing the button(23).
• Press the button(27) in order to pause playback.
• Stop playback by pressing the / button(26).
• To fast forward or rewind the band, first stop playback by pressing the / button(26). Then press the
buttons (25) or (24).
• Press the / button(26) again in order to open the cassette compartment and remove the cassette.
• Cassettes can be used on both sides. If the cassette is at the end of its play duration, remove the cassette
and turn it 180 degrees on its vertical axis. Insert the cassette again in order to play the other side.
Auto-Stop function
• If the cassette is finished playing, the cassette part automatically switched off. This is also the case for
recording.
Recording onto cassette
• You can record from radio, a CD, USB or SD/MMC memory card. When recording and copying the copyright
should be observed.
• Recording on chrome (IEC II) and metal bands (IEC IV) is not possible. Use only NORMAL (IEC I) bands.
• Insert the cassette which you want to overwrite.
• Press the button(27).
• Press the button(22). The button(23) will be pressed at the same time.
• Select the desired source with the FUNCTION switch (19).
• To record from radio, set the FUNCTION switch (19) to RADIO. Select the desired station with (37) or
(32)
• To record from CD, USB or SD/MMC memory card, set the FUNCTION switch (19) to CD.
• In order to start recording press the button(27) again.
• To interrupt recording press the button(27).
• Press the / button (26) in order to stop recording.
• The recording is not influenced by the set volume.
JGC-RRMP-6910-IM-DE-EN-V2.indb 37 11/08/2009 1:13 PM