Operation Manual

FLASH MEMORY

ENGLISH

USB / SD / MMC Flash Memory playback

1. Set the FUNCTION switch to CD.

2. Press the STOP/CD/USB/SD button longer than 2 seconds to select USB Mode.

Press again for more than 2 seconds to select SD Mode. Press the button yet again

for more than 2 seconds to switch back to CD Mode.

USB READ or SD READ will be shown in the display

3. Plug in USB Memory Stick into USB Port or insert SD or MMC card in card slot

4. After reading the content, the display will show total track number

5. Playback will start automatically.

6. Press BACK or NEXT to select tracks

7. More operation, see „CD/MP3 Player“ section of this manual.

8. Press STOP to end playback

Note : Due to fast changing IT technology, this unit may not be compatible with some

USB or SD/MMC flash storage device.

• USB support Specification : USB V1.1/V2.0

• Only use SD cards in capacity range of 256MB to 2GB. Lower or higher capacities

are not supported by this player.

• USB Memory maximum support 2GB.