Operation Manual

SERVICE & SUPPORT
28
ENGLISH
If a fault occurs, first check the points listed below before taking the set for repair. Do not open the set
as there is a risk of electric shock.
Warning: Under no circumstances should you try to repair the set yourself, as this will invalidate
the warranty
If this product should be defective, despite our high standard quality control, please
contact the service & support hotline. The hotline is available Monday through Friday
from 10am to 6pm at this number:
0180 5 - 22 17 84
(€ 0,14 / Min. Germany only)
In case your product needs to be sent to our service centre,
please use the provided return sticker.
If the return sticker is missing, please contact the service & support hotline.
Problem Cause Solution
No sound / power
Volume not adjusted Adjust the Volume
Connect the AC cord properly
Display does not function
properly / No reaction to
operation of any of the controls
Electrostatic discharge
Switch off und aunplug the set.
Reconnect after a few seconds
The CD skips tracks
CD damaged or dirty Replace or clean CD
Program is active Quit program mode
No disc indication
No CD inserted Insert a CD, CD-R or CD-RW
CD badly scratched or dirty Replace or clean CD
Laser lens has steamed up Wait until lens has cleared
CD-R is blank or the disc is not
finalized
Use a finalized CD-R
CD Playback does not work
CD badly scratched or dirty Replace or clean CD
Laser lens steamed up
Wait until lens has adjusted to
room temperature
USB / SD Card failure
USB / SD Card Memory connecting
error
Unplug and reinsert memory card
or USB stick
USB / SD Memory does not con-
tain playable files
Use a USB Memory containing MP3
files
Power cord not securely
connected