User Guide
JHS PEDAL MANUAL 11
TREMOLO MODULATION
Tidewater
Classic Vox and Fender Blackface tremolo tones in a tiny package. The Tidewater will
have you oating on the waves of tone in no time.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided.
3mA consumption.
VOLUME - Controls the overall volume of the unit. You
can set the volume at unity gain or use it to boost your
signal.
Mix - Controls the depth of the tremolo effect. With the
mix all the way down you can use the Tidewater as a
boost preamp.
Speed - Controls the speed of the tremolo effect. Left is
slower and right is faster.
Internal Dip Switches - Inside the pedal on the back
of the PCB there are three small dip switches. When all
three are in the down position, the speed of the
tremolo is in the standard mode. When all three are in
the up position, the available speed is half of the
standard mode, giving you slower speeds.
Jacks
INPut - 1/4” jack on the right side of the pedal. output - 1/4” jack on the left side of the pedal.
Emperor v2
True analog bucket brigade Chorus and Vibrato with tap tempo waveform selection and more.
Classic modulation with modern amenities.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 57ma consumption.
Volu me - Controls output volume.
eq - For the V2, the EQ control is an active tilt EQ.
Noon is at. Turning to the left boosts highs and cuts
lows, while turning to the right boosts lows and cuts
highs
Speed - Controls time/speed of the modulation.
Depth -
Controls how deep/wet the modulation is
perceived.
Chorus/Vibrato Toggle -
Lets you choose between
Chorus and Vibrato
Waveform Toggle -
Choose between Sine, Square,
and Triangle waveforms.
Input -
1/4” jack on the top right receives your instrument’s
signal.
Output -
1/4” jack on the top left sends the signal out of the
pedal to an ampli
er or pedal chain. You can use an optional
TRS splitter cable to send your signal to two amps for true
stereo modulation.
Ta p/Exp -
1/4” jack on the right side of the pedal. In Expression
Mode, connect any TRS expression pedal to control the pedal’s
speed. The speed parameters are preset for realistic rotary
speaker sound. In Tap Mode you can set the speed using an
external tap tempo pedal. Choose which one you want by the
switch on the left side of the pedal.
Jacks Switches
By pa ss - Left footswitch turns the pedal on and off.
Tap tempo - Right footswitch taps in the speed of the mod-
ulation.
Ta p/Exp -
Switch on the left side of the pedal. Choose
between tap or expression mode for the TAP/EXP jack
Internal Buffer switch
- Switch lets you choose between
true bypass and buff
ered bypass by engaging or disengaging
the buffer.
Unicorn v2
When everything has been done and everything has been seen, we bring you the rst ever100%
analog signal path Uni-vibe* Photocell Modulator w/ Tap Tempo.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 100mA consumption.
Volu me - Controls output volume.
Depth - Controls intensity of the effect. Left is less,
right is more.
Speed - Controls rate/speed of the modulation. Left
is slower, right is faster. Will override tap tempo
speed when rotated.
ratio -
Controls the ratio of the tapped speed.
Choose quarter, dotted eighth, eighth, or triplet
notes. This allows for faster speeds with fewer taps.
dry/wet Toggle -
Dry mode is the classic Univibe
sound, while Wet is a vibrato sound.
Input -
1/4” jack on the top right receives your instrument’s
signal.
Output -
1/4” jack on the top left sends the signal out of the
pedal to an amplier or pedal chain.
Ta p/Exp -
1/4” jack on the right side of the pedal. In expression
mode, connect any TRS expression pedal to control the pedal’s
speed. In tap mode, connect an external tap tempo controller
or another pedal that receives tap tempo to use the Unicorn to
slave the other pedal. Choose which one you want by the
switch on the left side of the pedal.
Jacks Switches
By pa ss - Left footswitch turns the pedal on and off.
Tap tempo - Right footswitch taps in the speed of the mod-
ulation.
Internal tap/Exp switch -
Internal switch lets you choose
between tap or expression mode for the TAP/EXP jack.