User Guide

JHS PEDAL MANUAL 17
UTILITY
Active
A/B/Y
Take one input and send it to two different outputs, or to both at once! Completely silent
switching makes this the perfect tool for your rig in a multitude of situations. The A channel is
engaged when the LED is red, and the B channel is engaged when the LED is green. Both
channels are engaged when the Y switch is engaged.
INPUTOUTPUTs Power
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 47mA consumption.
Buffered
Splitter
This little box of magic takes your input signal and splits it into two always-on outputs that are
buffered so you don’t lose clarity or tone in any way. Split your signal any way you can imagine!
*The Buffered Splitter does not take two inputs and create one output. If you attempt this it will not work.
Requires 9V DC Negative power. 19mA consumption.
INPUTOUTPUTs Power
Little
Black Amp
Box
If your amp has a “send/return” effects loop simply connect the input your SEND and the output
to your RETURN. You can use the LBAB to saturate your preamp section and get some cranked
tube tone at bedroom levels! No power required.
*The Little Black Amp Box is not an attenuator. Do not place between your amp head and speaker cabinet.
INPUTOUTPUT
VOLUME
Little black Buffer
The greatest tool for your tone you never realized you needed. Fix all that tone loss from
your true bypass pedals and long cable runs.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 100mA
max consumption.
Plug it in!
INPUT - Jack on the right side of the pedal.
OUTPUT - Jack on the left side of the pedal.
Jacks