User Guide

JHS PEDAL MANUAL 5
Moonshine v2
Non-transparent overdrive that goes down as smooth as your grandaddy’s White Lightning. Thick rich
mids, clear top end, the best bass response of any drive we make, more volume than you will ever need,
and the ability to do medium/high gain overdrive like nothing you’ve ever heard make this a hard
habit to kick.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 30mA
consumption.
VOLUME - Controls the output volume.
DRIVE - Controls the amount of drive or gain just 
like a tube amp being cranked at high volumes.
TONE - Controls the amount of brightness. Right
is brighter, left is darker.
BLEND - Adds in clean signal as you turn from
left to right. All the way left is full overdrive, all
the way right is full clean.
PROOF TOGGLE - Down is a lower volume yet
more saturated tone. Up is louder and more
open and crunchy.
INPUT - Jack on the right side of the pedal.
OUTPUT - Jack on the left side of the pedal.
Jacks
Ruby Red
Butch Walker’s signature 2-in-1 overdrive/boost. No matter what style music you play, the Ruby
Red is a powerful tone shaping tool that will offer you everything from tone enhancement to
boost, overdrive, distortion, and even fuzz.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 100mA
max consumption.
RIGHT SIDE - BOOST
BOOST - Increases volume. Right is louder, left is quieter.
LEFT SIDE - SUPERBOLT
VOLUME - Controls the output volume. Right is louder,
left is quieter.
DRIVE - Controls the amount of drive or gain just 
like a tube amp being cranked at high volumes.
TONE - Increases brightness. Right is brighter, left is
darker.
FOOTSWITCHES
RIGHT FOOTSWITCH - Turns Boost on or off.
LEFT FOOTSWITCH - Turns SuperBolt on or off.
INPUT - Jack on the right side of the pedal.
OUTPUT - Jack on the left side of the pedal.
Jacks
TOGGLES
+ TOGGLE - Engages higher gain mode when ipped
down.
ORDER TOGGLE - Selects the order of the effects. Right
is Boost > SuperBolt, left is SuperBolt > Boost. When
the Boost is rst it will cause the SuperBolt to be more
saturated. When the Boost is second it will cause it to
be louder
Superbolt v2
Supro* tones in a pedal and a whole lot more! This discreet circuit does everything
from clean boost to sagging exploding small amp distortion with ease.
*The word/name Supro is a registered trademark of Pigtronix. The JHS SuperBolt pedal is in no way affiliated with Supro® USA or Pigtronix.
Controls
POWER - Uses 9V DC Negative Center. The SuperBolt is internally charged to 18V. Do not use more than
9V DC. Your warranty will be voided. 3mA consumption.
VOLUME - Controls the output volume.
DRIVE - Controls the amount of drive or gain just 
like a tube amp being cranked at high volumes.
TONE - Increases brightness. Right is brighter, left is
darker.
GAIN TOGGLE - Engages higher gain mode when
ipped up. The LED will turn red to indicate that you are
in the higher gain mode.
RED REMOTE JACK - The upper jack on the right side
of the pedal is for a JHS “Red Remote” switch. Using
this switch you can toggle between the higher gain
mode and the standard mode on the y.
INPUT - Lower jack on the right side of the pedal.
OUTPUT - Jack on the left side of the pedal.
Jacks
Morning Glory v4
Transparent low/medium gain overdrive that never gets in the way. The overdrive
you’ve always wanted but could never nd.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 43mA
consumption.
VOLUME
- Controls the output volume.
DRIVE - Controls the amount of drive or gain just 
like a tube amp being cranked at high volumes. You will
notice that as you turn up the drive, it also adds
brightness.
TONE - Controls the amount of brightness. Right is
brighter, left is darker.
GAIN TOGGLE - Engages higher gain mode when
ipped up. The LED will turn red to indicate that you are
in the higher gain mode.
RED REMOTE JACK - The upper jack on the right side
of the pedal is for a JHS “Red Remote” switch. Using
this switch you can toggle between the higher gain
mode and the standard mode on the y.
INPUT - Lower jack on the right side of the pedal.
OUTPUT - Jack on the left side of the pedal.
Jacks
BRIGHT CUT SWITCH - Switch on the right side of the
pedal that cuts the highest frequencies in case the
overall tone is too bright.
OVERDRIVE & DISTORTION