User Guide
JHS PEDAL MANUAL 6
AT+
Andy Timmons’ signature channel drive and boost. British style overdrive and
distortion with a boost that will have your guitar singing like Andy’s!
Controls
POWER - Uses 9V to 18V DC Negative Center. This pedal CAN be run at 18V for more headroom and
greater dynamics. Do not use more than 18V DC. Your warranty will be voided. 15mA consumption.
Volume - Controls the output volume.
Drive - Controls the amount of drive/gain just
like a tube amp being cranked at high volumes.
EQ - High pass lter that naturally brightens or
darkens the overall tone of the pedal. Right is
brighter, left is darker.
Air - Just like the presence knob on an amp, this
allows you to dial in the perfect amount of high end
for compatibility with any amp. Right is brighter, left
is darker.
Boost - Controls the volume of the independent
boost circuit. Right is more, left is less.
Toggle - Gives you 25w/50w/100w feel. Up is 25w,
down is 50w, and middle is 100w.
Jacks
INPut - 1/4” jack on the right side of the pedal.
output - 1/4” jack on the left side of the pedal.
Switches
AT Bypass - Switch on the left side of the pedal.
Boost bypass - Switch on the right side of the
pedal.
The kilt v2
A tone tweakers dream pedal. Boost, overdrive, distortion, fuzz and spitting
chaos in one box. Don't be seen without your Kilt on.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 64ma consumption.
KNOBS
VOLUME - Controls the output volume.
GAIN - Controls the amount of drive or distortion.
TONE - Controls the amount of brightness. Right is
brighter, left is darker.
JACKS
INPUT - Lower jack on the right side of the pedal.
RED REMOTE - Upper jack on the right side of the pedal
with a red washer.
OUTPUT - Jack on the left side of the pedal.
TOGGLES
LOW CUT TOGGLE - The down position is at eq while
the up position is the “cut” mode with less bass.
G1 & G2 TOGGLES - These toggles work together to
give you up to 4 different resistance clipping options.
Both toggles down is the lowest gain setting. G1 up
gives you more overdrive. G2 up gives you more fuzz.
Both toggles up gives you the heaviest gated fuzz the
Kilt offers! The G2 toggle can also be engaged by a
Red Remote (indicated by the red circle around the
toggle).
Sweet Tea V3
Everything possible, medium to high gain. Our very own Angry Charlie V3 and our
Moonshine V2 make this a high gain monster that goes down easy on a summer
night.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 81mA consumption.
LEFT SIDE - ANGRY CHARLIE V3
VOLUME - Controls the output volume.
DRIVE - Controls the amount of drive or gain just
like a tube amp being cranked at high volumes.
BASS - Controls the amount of bass. 50% is relatively at
while turning it to the left decreases bass and to the right
increases bass
MIDS - Controls the amount of mids. 50% is relatively at
while turning it to the left decreases mids and to the right
increases mids.
TREBLE - Controls the amount of treble. 50% is relatively at
while turning it to the left decreases treble and to the right
increases treble.
RIGHT SIDE - MOONSHINE V2
VOLUME - Controls the output volume.
DRIVE - Controls the amount of drive or gain just
like a tube amp being cranked at high volumes.
TONE - Controls the amount of brightness. Right is brighter,
left is darker.
BLEND -
Adds in clean signal as you turn from left to right. All
the way left is full overdrive, all the way right is full clean.
PROOF TOGGLE - Down is a lower volume yet more
saturated tone. Up is louder and more open and crunchy.
INPUT - 1/4” jack on the top right side of the pedal.
OUTPUT - 1/4” jack on the top left side of the pedal.
Jacks
Calhoun V2
Mike Campbell’s signature 2-in-1 overdrive/fuzz. The Calhoun is the perfect pedal for the player who
wants straightforward, no frills and easy to use dirt tones in a single package. It covers everything you
need for rock and blues tones with ease.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 10mA consumption.
RIGHT SIDE - FIREFLY FUZZ
VOLUME - Controls the output volume.
FUZZ - Controls the amount of fuzz.
TONE- Controls the brightness. Works as a cut. Left is brighter,
right is darker.
BIAS - Controls the amount of voltage to the silicon transistors.
Right is cleaner more voltage, left is dirtier less voltage causing
more saturation.
LEFT SIDE - TWIN TWELVE OVERDRIVE
VOLUME - Controls the output volume.
DRIVE - Controls the amount of drive or gain just
like a tube amp being cranked at high volumes.
BASS - This is an active bass control just like the one you would
nd on the classic amp, modied for a more usable sweep. Left
is less, right is more
TREBLE - Active treble control just like the amp. Left is less,
right is more.
INPUT - Jack on the right side of the pedal.
OUTPUT - Jack on the left side of the pedal.
Jacks
FOOTSWITCHES
RIGHT FOOTSWITCH - Engages the Fuzz side.
LEFT FOOTSWITCH - Engages the Drive side.
TOGGLE SWITCH - Selects the order of the effects. When
switched to the left the Fuzz is rst in the signal chain.
When switched to the right the Drive is rst.
OVERDRIVE & DISTORTION