User Manual

JHS PEDAL MANUAL 10
TREMOLO MODULATION
Honey comb deluxe
Classic blackface and Voxy tremolo tones with two totally adjustable and foot-
switchable speeds in a small footprint.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 100mA
max consumption.
JACKS
Volume - Controls the output volume. Can be set at
unity or a slight boost.
Depth - Controls the depth of the tremolo.
Speed 1 - Controls the speed of the tremolo when the
green indicator LED is lit.
Speed 2 - Controls the speed of the tremolo when the
red indicator LED is lit.
INPUT - Jack on the right side of the pedal.
OUTPUT - Jack on the left side of the pedal.
Jacks
FOOTSWITCHES
Left Footswitch - On/Off switch
Right Footswitch - Toggles between green speed and
red speed.
This pedal contains an internal switch that controls the speed range
available. Up is stock speed mode, and down is slow speed mode.
The Emperor
True analog bucket brigade Chorus and Vibrato with tap tempo waveform
selection and more. Classic modulation with modern amenities.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 100mA
max consumption.
FOOTSWITCHES
Bypass - Left footswitch turns the pedal on and off.
Tap Tempo - Right footswitch taps in the speed.
KNOBS
Volume - Controls the output volume.
Tone - Controls the amount of brightness. Left is darker,
right is brighter.
Speed - Controls the time/speed of the modulation.
Depth - Controls how deep or wet the modulation is
perceived.
Chorus/Vibrato Toggle- Lets you choose between Chorus
and Vibrato
Waveform Toggle - Choose between Sine, Square, and
Triangle waveforms.
JACKS
Input - Receives your instrument’s signal.
Output - Sends the signal out of the pedal to an amplier
or pedal chain. You can use an optional TRS splitter cable
to send your signal to two amps for true stereo
modulation.
Tap/Exp. - Choose which one you want by the internal
switch. In Expression Mode, connect any TRS expression
pedal to control the pedal’s speed. The speed parameters
are preset for realistic rotary speaker sound. In Tap Mode
you can set the speed using an external tap tempo pedal.
INTERNAL SWITCHES
TBP/BUF - Choose between true-bypass or buffered
bypass.
TAP/EXP - Choose between tap or expression for the Tap/
Exp. jack.
Unicorn
When everything has been done and everything has been seen, we bring you the
rst ever100% analog signal path Uni-vibe* Photocell Modulator w/ Tap Tempo.
Controls
POWER - Uses 9V DC Negative Center. Do not use more than 9V DC. Your warranty will be voided. 100mA
max consumption. We suggest putting the Unicorn before overdrives in your signal chain.
FOOTSWITCHES
Bypass - Left footswich turns the pedal on and off.
Tap Tempo - Right footswitch taps in the speed/rate.
KNOBS
Volume - Controls the overall output volume.
Depth - Controls the intensity of the effect. Left is less
effect, right is more.
Speed - Controls the speed/rate of the effect. Left is
slower, right is faster. Will override the tap-tempo speed
when rotated.
Ratio - Controls the ratio of the tapped speed. Choose
1/4, dotted 1/8, 1/8, triplets, or a blend in-between. This
allows for faster speeds with fewer taps.
JACKS
Input - Receives your instrument’s signal.
Output - Sends the effect to an amplier or pedal
chain.
TAP/EXP - Choose which one you want by the internal
swich. In Expression Mode, connect any TRS
expression pedal to control the pedal’s speed. In Tap
Mode you can set the speed using an external tap
tempo pedal.
TOGGLE
Dry/Wet - Choose between full wet vibrato style or
add in the dry signal for the classic Uni-vibe sound.
INTERNAL SWITCH
TAP/EXP - Choose between tap or expression for the
TAP/EXP jack.