Fr CRT Jo IRA a) ick MODEL NO wild Read all instructions carefully before setting up and operating the unit, Keep this instruction manual for TT ges
INTRODUCTION DESCRIPTION OF UNIT AND PARTS SPECIFICATIONS IMPORTANT SAFETY INSTRUCTIONS installation and operation een Electrical safety vss ear sw sv ofi7,08 INSTALLATION INSTRUCTIONS Suggestediooisforinstallations techs Selection of institutionalization. oss sgl AftachingexhausthoS@.
DESCRIPTION OF UNIT AND PARIS @ Handle @ Al r-outiet Grille & Exhaust Connector (I) drainage Hole @& Control Panel BD Castor @ Power Cord (Pp air-outset (D Filter Frame Upper (D Filter Frame Lower Remote Control $ \ Air Exhaust Hose Hose Duties Window Panel PICS Drain Hose ) 2x Foam Seal a
SPECIFICATIONS Control Type Touch button + Remote | WiFi YES Cooling Capacity | Timer YES Power Consumption 1280W 11.1A i Drain Options Continuous and manual Temperature Range 61°F ~ 88°F i Unit Dimensions Amount Of Air Moved (CFM Max.) 205CFM Refrigerant R410A IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Your safely and the safely of others are very important. Incorrect operation due to ignoring instruction will cause harm or damage.
IMPORTANT SAFETY INSTRUCTIONS — Emm To reduce the risk of explosion, fire, death, electric shock, scalding, or personal injury when using this appliance, please observe the following basic precautions: INSTALLATION AND OPERATION + Some pairs whit sharp edges may cause » The portable air conditioner 5 8 heavy injury. So gloves are highly recommended obi act, which needs two or more people fo for unpacking and Installing. Hit and install Called io do may result in injury or haler accidents.
IMPORTANT SAFETY INSTRUCTIONS — Emm To reduce the risk of explosion, fire, death, electric shock, scalding, or personal injury when using this appliance, please observe the following basic precautions: INSTALLATION AND OPERATION = Keep the product away from fire. Do not = Do not use heating equipment near the sloe or use flammable apses or materials appliance. near the appliance.
IMPORTANT SAFETY INSTRUCTIONS * Read all instructions before using the « Before cleaning or maintenance operations, appliance and save theses Instructions. always unplug the unit from the outlet = Paar on this appliance in strict concordance » lithe product hae been submerged, contact with ELECTRICAL SAFETY guide tha JHS customer service canter for (Sane 07) instructions before resuming use, * Keep the air inlet and outlet free of = lf the product makes a strange nominee or obstructions.
IMPORTANT SAFETY INSTRUCTIONS + Do not place containers with liquids on the « Do not use the product in places where it unit. could be splashed by water. + Do not use wale: Io clean the air conditional. * Do nal ringer or place | infers or objects into the air discharge ares or rear grille of the unit. + California Safe Drinking Water and Toxic Enforcement Act This product contains chemicals known to the Site of California to cause cancer and birth defects of other reproductive harm.
IMPORTANT SAFETY INSTRUCTIONS /\ WARNING READ ALL INSTRUCTIONS BEFORE USE ELECTRICAL SAFETY (High voltage appliance) ELE eaten DE ee lee ia gc le pee cl BT cle Lade eta fg ccd During the installing or moving the appliance, be careful not to pinch, crush, or damage the [lL eds Do not damage alter, excessively bend, twist pull or heat the power cord Do not modify or extend the power cord. Bly hell est He eg Do not rest hot or heavy objects on the appliance and power cable.
IMPORTANT SAFETY INSTRUCTIONS /\ WARNING READ ALL INSTRUCTIONS BEFORE USE ELECTRICAL SAFETY (High voltage appliance) * Do not Use multiple-outlet power strip or extension cord with this appliance.
INSTALLATION INSTRUCTIONS SUGGESTED TOOLS FOR INSTALLATION + Screwdrivers {medium size) » Tape measure or ruler « Knife or scissors « Saw {In the event that the window kit needs to be cut down in size because the window is too narrow for direct installation} SELECTION OF INSTALLATION LOCATION €D Place the unit near a window. oO For best performance, allow at least inch (50cm) ~~ of air space on all sides of the unit for good air circulation.
INSTALLATION INSTRUCTIONS Nos: The length of the exhaust hose is specially designed for the unit. Do nol replace or extend it with another hose as this could cause malfunction. Do not block airflow around the air conditioner. The exhaust hose should be free of any obstructions. A bent hose will block exhaust air and cause the unit to malfunction or shut-off.
INSTALLATION INSTRUCTIONS Panel 8 cinch-38inch inch-57Inch glee | inch-3dinech For a 197-38" window opening, use panel A+B For a 397-87" window opening, use panel A+B+C {Cut short B if necessary) Fig.b Fig.c CONNECT HOSE TO WINDOW KIT The air exhaust hose must be installed or removed from the portable air conditioner in accordance with the way iris being used: | = 1. Insert hose outlet into the window panel A fully. elide it for locking. 3. Fix the connection firmly, locking the type A screw.
INSTALLATION INSTRUCTIONS & , i Cut the foam seal to the proper length, then attach it to the window frame or pane! for sealing. LTE oD Press and glide the battery cover on the rear of the remote, remove the cover. (D) Insert two new R03 "AAA" 1.5V batteries into the battery compartment. Make sure the polarity is correct. (D Battery's not included in the package because of transportation safely. Hake ruses the polarity ls correct. 5 NOTE: « Do pot mix old and new batteries.
INSTALLATION INSTRUCTIONS Point the remote control to the air conditioner. The remote control must be no more than 168FL {5 meters) away from the appliance (without obstacles between the remote control and the appliance). The remote control must be handled with extreme care. Do not drop it or exposes it to direct sources of heat, sunlight or water.
STN EN EEE DISC CONTROL PANEL AND REMOTE KEYPAD OPERATION OF FUNCTIONS IS THE SAME WHEN USING REMOTE OR CONTROL PANEL, UNLESS OTHERWISE STATED. 1. When the machine is powered on for the first time, the buzzer will sound “power-on” tone, and then the unit will get into standby status. LCD displays current TEMP. Press the key fo turn on and urn off the unit. In the case of power on, press the key to turn off the machine; in the case of power off, press the key to tum on the unit. 3.
CONTROL PANEL AND REMOTE KEYPAD OPERATION EE EGC OPERATION OF FUNCTIONS 18 THE SAME WHEN USING REMOTE OR CONTROL PANEL, UNLESS OTHERWISE STATED. 6. Timer In the case of power on and the units turn off, press the key to set time for turning on the unit. In the case of power on and the units turn on, press the key to set time for turning off the unit. Press this key, when the timing symbol flashes (Hour indicator}, then press a @ to select the required timing value.
OPERATION BLEED JHS Smart (WI-Fi) Guide OPERATION GUIDE: od Please ensure your mobile device Is connected to WiFi router. Also, the WiFi router should already be connected to Internet before doing user registration and network configuration process.
JHS Smart (WI-Fi) Guide OPERATION BLEED OPERATION GUIDE: (PD Registration Fill in your mobile number or e-mail address. Click Next and wait a moment {1-10 minutes) Enter the verification code which is sent from JHE service center via SMS or email, then set a password by yourself. Click Confirm to finish registration.
OPERATION BLEED JHS Smart (WI-Fi) Guide OPERATION GUIDE: (D Add anew JHS smart unit. Insert power plug to keep unit be standby. Touch the WIFI button on the unit panel for 5 seconds until LED indicator keep continuous flashing. Back to home page, click Login Fill in your mobile number or e-mail address. Fill in your password and finish login.
JHS Smart (WI-Fi) Guide OPERATION BLEED OPERATION GUIDE: @ Add a new JHS smart unit.
OPERATION BLEED JHS Smart (WI-Fi) Guide OPERATION GUIDE: 0 Now you can control the unit to set your room temperature whether you are driving on road or at the office. Turn your JHS alr conditioner on and off Change working modes Set the temperature as 4 Back AD TEST Ee .
JHS Smart (WI-Fi) Guide OPERATION BLEED OPERATION GUIDE: BH Now you'll have the control you need to set your room temperature whether you're driving on the road or at office. Set fan speeds for comfort and Set schedules to programmer a customized timer energy savings.
OPERATION BLEED JHS Smart (WI-Fi) Guide OPERATION GUIDE: BH Now you'll have the control you need to set your room temperature whether you're driving on the road or at office.
JHS Smart (WI-Fi) Guide OPERATION BLEED OPERATION GUIDE: @ special Functions @.g. Share the unit to your family or friend which installed JHS smart APP, tell them to finish login, then come true multi-user control. Hg Moe oe Banditry Device blame TEST § Chan Thi Newark Chan Now 2 ne Davies: Sharing Device: info Create Prong Bend Firebrick Hackwork for Firmware Updates Sames Lisa.
STN I ZEAL WATER DRAINAGE JHE portable air conditioner has a self-evaporation system. The condensed water will be recycled to the working compressor and evaporator, most of the water will be evaporated. This work procedure can not only improve cooling efficiency but also save energy for all customers.
OPERATION PROTECTION FUNCTION OF JHS PORTABLE AIR CONDITIONER 1. Frost Protection Function: In a cold environment, if the temperature of the EVA pipe sensor is too low, the machine will automatically enter protection status; if the temperature of the EVA pipe sensor rises to a certain temperature it can automatically revert to normal operation. Re . Overflow Protection Function: When water in the water pan exceeds the warning level, the machine will automatically send an alarm and stop working, and the W.
IN NRT Ne If the air filter is clogged with dust, the effectiveness of the air conditioning will be reduced. To keep your air conditioner working efficiently, you should clean the evaporator filter Avery two weeks of operation. * Press the fastener of air filter frame from the back of the unit. Disassemble the filter screen from the frame. Put the air filter screen into warm water {about 40°C J 104°F} with neutral detergent, dry tin the shade after rinsing clean.
RV ee RTT EER CTT TIT BEFORE YOU CALL FOR SERVICE « Check to make sure that the alr conditioner Is plugged In securely. If Its not, remove the plug from the outlet, Walt 10 seconds and plug it In again firmly. * Check the blown circuit fuse or the tripped main circuit breaker. [i they work properly, test the outlet with another appliance. Troubleshoot your problem by using the chart below. This list includes common occurrences that are not the result of a defect in factory workmanship or materials.
Lr ER eT Any repair, replacement, or warranty service, and all questions about this product should be directed to customer service center. The warranty commences the day the product is purchased and covers up to a period of 1 year {12 months) for parts (manufacturing defects only). JHE will replace the defective product with ether a new or re manufactured unit equivalent to your original purchase during the warranty period.
