PORTABLE AIR CONDITIONER ici MODEL NO before setting up and operating Le HE Sel ee RS pee
INTRODUCTION DESCRIPTION OF UNIT AND PARTS SPECIFICATIONS IMPORTANT SAFETY INSTRUCTIONS installation and operation 000 re eo Photoelectrically ses ve ese vue rns san eww 207,08 INSTALLATION INSTRUCTIONS Suggested tools installation ccs ca cae ss 5 asc ss (8 Selection of installation location. von Attaching exhaust hose.
DESCRIPTION OF UNIT AND PARTS & Handle @ Al r-outiet Grille @® Exhaust Connector (I drainage Hole @ Control Panel @ Castor oD Power Cord (B air-outlet (D Filter Frame Upper @ Filter Frame Lower Air Exhaust Hose Hose Duelist Hose inlet 2x Wing Nut and Bolt TN Hob
SPECIFICATIONS Control Type Touch button + Remote WiFi YES Cooling Capacity : Timer YES Power Consumption 1280W 11.1A : Drain Options Continuous and manual Temperature Range 61°F ~ 88°F Unit Dimensions Amount Of Air Moved {CFM Max.) 205CFM : Refrigerant R410A IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Your safety and the safely of others are very important. incorrect operation due to ignoring instruction will cause harm or damage.
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of explosion, fire, death, electric shock, scalding, or personal injury when using this appliances, please observe the following basic precautions: INSTALLATION AND OPERATION
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of explosion, fire, death, electric shock, scalding, or personal injury when using this appliances, please observe the following basic precautions: INSTALLATION AND OPERATION
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE ELECTRICAL SAFETY (High voltage appliance) Hee gel Tech at yc tee ag spl (loge Rei ae During the installing or moving the appliance, be careful not to pinch, crush, or damage the an Do not damage, alter, excessively bend, twist, pull or heat the power cord.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE ELECTRICAL SAFETY (High voltage appliance) + Do not ise multiple-outlet power strip or extension cord with this appliance. Do nol use an AC plug adapter with this appliance, Do not cut or remove the third (ground) prong from the power cord.
INSTALLATION INSTRUCTIONS SUGGESTED TOOLS FOR INSTALLATION * Screwdrivers {medium size) » Taps measure or ruler « Knife or scissors « Saw {in the event that the window kit needs to be cut down in size because the window is too narrow for direct installation) SELECTION OF INSTALLATION LOCATION {D Place the unit near a window. o For best performance, allow at least inch (50cm) ~~ &s of air space on all sides of the unit for good air circulation.
INSTALLATION INSTRUCTIONS Note: The length of the exhaust hose is specially designed for the unit. Do not replace or extend it with another hose as this could cause malfunction. Do not block airflow around the air conditioner. The exhaust hose should be free of any obstructions. A bent hose will block exhaust air and cause the unit to malfunction or shut-off.
INSTALLATION INSTRUCTIONS WINDOW KIT INSTALLATION Panel Pang © inch-87Inch [ Pans! B inch-38inch ol Manet Panel A Panel A Panel © inch-38inch For a 187-38" window opening, use panel A+B For a window opening, use panel A+B+C {Cut short 8 if necessary) Fig.b Fig.c CONNECT HOSE TO WINDOW KIT The air exhaust hose must be installed or removed from the portable air conditioner in accordance with the way it is being used: AE Panel A 1. Insert hose outlet into the window panel A fully. 2. Slide it for locking. 3.
INSTALLATION INSTRUCTIONS CHECK THE SEALING There may be a poor sealing effect because the gap is too large on some special window. Please purchase appropriate foam seal (not included in the package), in order to strengthen air conditioning refrigeration effect. OPERATION INSERTING BATTERIES IN THE REMOTE 3 Press and glide the battery cover on the rear of the remote, remove the cover. et © Insert two new R03 * "4 5V Make sure the polarity is correct. batteries into the battery compare <4 AAA ©) tent.
INSTALLATION INSTRUCTIONS USING THE REMOTE CONTROL Point the remote control to the air conditions. The remote control must be no more than 18F {5 meters) away from the appliance (without obstacles between the remote control and the appliance). The remote contra! must be handled with extreme care. Do not drop it or expose it to direct sources of heat, sunlight or water.
ITN eT EEE EN CEE COC CONTROL PANEL AND REMOTE KEYPAD OPERATION OF FUNCTIONS IS THE SAME WHEN USING REMOTE OR CONTROL PANEL, UNLESS OTHERWISE STATED. 1. When the machine is powered on for the first time, the buzzer will sound “power-on” dons, and then the unit will get into standby status. LCD displays current TEMP. 2. Power button © Press the key fo turn on and turn off the unit. In the case of power on, press the key to turn off the machine; in the case of power off, press the key to turn on the unit, 3.
CONTROL PANEL AND REMOTE KEYPAD OPERATION RE EGO OPERATION OF FUNCTIONS IS THE SAME WHEN USING REMOTE OR CONTROL PANEL, UNLESS OTHERWISE STATED. 6. Timer in the case of power on and the unit is turn off, press the key to set teems for turning on the unit. in the case of power on and the units turn on, press the key to set time for turning off the unit. Press this key, when the timing symbol flashes (Hour indicator), then press a o to select the required timing value.
OPERATION BEET eg a oe OPERATION GUIDE: od Please ensure your mobile device is connected to WiFi router. Else, the WiFi router should already be connected to Internet before doing user registration and network configuration process. @ Download and install APP: BD Registration Scan QR Code on the control pane! or search Open JHS smart APP, start Register “JHS smart” “QUAILS smart .
eg a oe OPERATION BEET OPERATION GUIDE: (D Registration Fill in your mobile number or e-mail address. Click Next and wait a moment {1-10 minutes) Enter the verification code which is sent from JHS service center via SMS or email, then set a password by yourself. Click Confirm to finish registration.
eg a oe OPERATION BEET OPERATION GUIDE: ¢D Add anew JHS smart unit. insert power plug to keep unit be standby. Touch the WiFi button on the unit panel for 5 seconds until LED indicator keep continuous flashing. Back to home page, click Login Fill in your mobile number or e-mail address. Fill in your password and finish login.
eg a oe OPERATION BEET OPERATION GUIDE: @ Add a new JHS smart unit.
eg a oe OPERATION BEET OPERATION GUIDE: oO Add a new JHS smart unit.
eg a oe OPERATION BEET OPERATION GUIDE: oO Add a new JHS smart unit.
(0-80) OPERATION GUIDE: o Now you can control the unit to set your room temperature whether you are driving on road or at the office.
OPERATION eg a oe OPERATION GUIDE: BD Now you'll have the control you need to set your room temperature whether you're driving on the road or at office. Set fan speeds for comfort and energy savings.
OPERATION BEET eg a oe OPERATION GUIDE: BD Now you'll have the control you need to set your room temperature whether you're driving on the road or at office. Le Sunday: Monday: Tuesday Waterway Thursday Friday Saturday.
(0-80) OPERATION GUIDE: @ special Functions €.g. Share the unit to your family or friend which installed JHS smart APP, tell them to finish login, then come true multi-user control. wit : LL Loa Lori Dandify: Device Nan ATTEST Check The Network: Chick Now» Gi Device Sharing Re vie Info.
ITN eT EAE EE UN es JHS portable air conditioner has a self-evaporation system. The condensed water will be recycled to the working compressor and evaporator, most of the water will be evaporated. This work procedure can not only improve cooling efficiency but also save energy for all customers. Since most of the condensed water will be used to aid the compressor, there is no need of drain hose in general using environment.
OPERATION PROTECTION FUNCTION OF JHS PORTABLE AIR CONDITIONER 1. Frost Protection Function: in a cold environment, if the temperature of the EVA pipe sensor is too low, the machine will automatically enter protection status; if the temperature of the EVA pipe sensor rises {0 a certain temperature it can automatically revert to normal operation, Ba . Overflow Protection Function: When water in the water pan exceeds the warning level, the machine will automatically sound an alarm and stop working, and the W.
CARE AND CLEANING If the air filter is clogged with dust, the effectiveness of the air conditioning will be reduced. To keep your air conditioner working efficiently, you should clean the evaporator filer every two weeks of operation. * Press the fastener of air filter frame from the back of the unit. Disassemble the filter screen from the frame. Put the air filter screen into warm water {about 40°C / 104°F) with neutral detergent, dry tin the 1 shade after rinsing clean.
TROUBLESHOOTING EER CTT BEFORE YOU CALL FOR SERVICE » Check to make ruses that the alr conditioner Is plugged In securely. If it Is not, removes the plug from the outlet, Walt 10 seconds and plug it In again firmly. * Check the blown circuit fuse or the tripped main circuit breaker. If they work properly, test the outlet with another appliance. Troubleshoot your problem by using the chart below. This list includes common occurrences that are not the result of a defect in factory workmanship or materials.
WARRANTY a i TT Any repair, replacement, or warranty service, and all questions about this product should be directed to customer service center. The warranty commences the day the product is purchased and covers up to a period of 1 year {12 months) for parts {manufacturing defects only). JHE will replace the defective product with either a new or re manufactured unit equivalent to your original purchase during the warranty period.
