User's Manual
Table Of Contents
- CHAPTER 1 INTRODUCTION
- CHAPTER 2 INSTALLATION
- CHAPTER 3 NORMAL MODE AND USER MODE
- 3.1 Normal Mode
- 3.2 User Mode
- 3.3 The major menus
- 3.3.1 Sub-menus for Printer Info
- 3.3.2 Sub-menus for Head Info
- 3.3.3 Sub-menus for Version Info
- 3.3.4 Sub-menus for Printer Setup
- 3.3.5 Sub-menus for card setup
- 3.3.6 Sub-menus for Ribbon/Film Setup
- 3.3.7 Sub-menus for Image Setup
- 3.3.8 Sub-menus for Interface Setup
- 3.3.9 Sub-menus for Cleaning
- 3.3.10 Sub-menus for Option
- 3.3.11 Sub-menus for Reset User Default
- CHATPER 4 CLEANING
- CHATPER 5 TROUBLESHOOTING
- CHAPTER 6 SPECIFICATION
- Appendix I: OPTIONS
- Appendix II: FCC STATEMENT
- Appendix III: DASCOM REPRESENTATIVES
Dascom DC-7600 User Guide V1.0
Please put the card carefully. Ensure that magnetic stripe CARDS and
contact smart CARDS are properly placed in the card feeder. If the card
is inserted in the wrong direction, the code selection may not work
properly.
(3) Open the top cover of card printer.
A○
1E
AFirstly, press the right side of the card cassette into the printer;
A○
2E
A Then, press the left side of the card cassette into the printer;
(4) Close the top cover.
When take out the card cassette, lift up the left side of the card cassette
firstly, then take the left side. In this way, user can easily take out the
card cassette.
24