User's Manual

Tally Dascom DL-210 User Guide V1.3

2.2 Attaching Power

Checking the voltage of the power adapter

Before you connect the power adapter to the power socket check if the voltage is

correct. If you connect the power adapter to power with incorrect voltage this may

result in electrical damage to adapter and printer.

1. Make sure the printer and the computer are powered off.

2. Connect the power cord to the power adapter.

3. Connect the power adapter to the power supply interface at the rear of the

printer.

4. Ensure the power cord is securely connected. Connect the power cord plug to a

mains socket on the wall.

1) Please only use the power adapter are recommended by supplied or

equivalent products;

2) When disconnecting the AC adapter plug, handheld plug connector housing, to

avoid the pulling on the cable in force;

3) Avoid drag the power adapter cable, otherwise it will damage the cables,

causing fire and shock;

4) Avoid put power adapter around a heating device, otherwise the cable may

melt, causing fire and shock;

5) If you do not use the printer in a long time, disconnect the power supply of

printer power adapter.