User's Manual

Tally Dascom DL-210 User Guide V1.3
13
2 SETUP
1.1 Flow of Setup
This chapter consists of the following sections along with the setup flow of the product and
peripherals.
2.1 Placing the Printer
You can install this printer horizontally. Place the printer on a solid, flat, stable surface; ensure the
printer is placed in a stable position and there is easy access for users to the control panel and roll
paper holder. Also ensure there is enough space for sufficient ventilation and for the printout.
When selecting the placement position, be aware of the following advice:
 Never place the printer near to any flammable gas or explosive substances.
 Do not expose the printer to direct sunlight. If you cannot avoid placing the printer near a
window, protect it from the sunlight with a curtain.
 When connecting a computer to the printer, make sure the maximum recommended cable
length is not exceeded.
 Ensure sufficient distance between the printer and any heating devices or radiators.
 Avoid exposing the printer to extreme temperature or air humidity fluctuations. Avoid exposure
to dusty environments.
 It is recommended the printer is installed in a position which reduces noise exposure to the work
place during printing.
1. Placing the Printer (page 13)
2. Adjusting Sensor (page 15)
3. Loading Paper Roll (page 16)
(page
4. Loading Ribbon (optional) (page 18)
(page
5. Attaching Power (page 14)
6. Printing Self-test (page 42)
7. Connecting the Printer to the Host Computer (page 23)